do not scale from this print lss-1xx-xx-xx-dv-xx-xx no of positions -05, -10, 20, -30, -40, -50 (per row) lead style -01: 3 mm -02: 6 mm -03: 4 mm plating specification row specification -l: light gold (use c-185-xx-lg) -f: flash gold (use c-185-xx-fg) -lm: light gold, matte tin tails (use c-185-xx-lm) -fm: flash gold, matte tin tails (use c-185-xx-fm) option -k: polyimide film (use k-500-300) (see fig 2, sht 3) -tr: tape & reel -dv: double vertical -a: alignment pin (-01 lead style available with -a pin only) -lc: locking clip (-02 & -03 lead styles only) (use lc-08-tm-01) (see fig. 3, sht 3) (see note 6) option (no of pos x 0.635[.0250]) +4.750[.1870] ref 0.20 ref .008 (no of pos -1) x 0.635[.0250] 0.635 .0250 (tol non-accum) 2.69 .106 ref c1 01 02 see note 4 "b" ref 0.85 ref .033 0.75 ref .030 ref (no of pos x 0.635[.0250]) +1.500[.0591] "a" "a" 4.600 0.130 .1811 .0051 0.80 .031 ref (typ) "c" ref "a" .076[.0030] 0.160 0.130 .0063 .0051 0.866 0.100 .0341 .0039 (see note 5) 0.670 0.100 .0264 .0039 (see note 5) section "a"-"a" scale 8 : 1 c2 c4 c5 lss-xx-01-dv-a c-185-01-xx c3 c6 (see table 3) (see table 3) (see table 3) 0.10 [.004] 4.00 .157 ref 0.14 .006 ref 1.10 .043 ref 3 max sway (either direction) c designed & dimensioned in millimeters (inches for reference) fig. 1 lss-120-01-xx-dv-a shown y sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles .x: .3 [.01] 2 .xx: .13 [.005] .xxx: .051 [.0020] material: .635mm terminal/socket combo by: lss-1xx-xx-xx-dv-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 07/01/2002 3 1 sheet scale: 4:1 insulator: lcp, color: black contact: phos bronze f:\dwg\misc\mktg\lss-1xx-xx-xx-dv-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .038 [.0015]. 3. minimum pushout force; terminals: .5 lbs, contacts: .5 lb. 4. pin 01 will mate with contact 02 on mating connector, see application views. 5. measure from top of vertical wall. 6. minimum pull out force for -lc is .75 lb. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision y
packaging view tube: pt-1-24-01-134 plug: tp-24-02 tube: pt-1-24-05-29 plug: tp-09 9.00 .354 9mm stack height lss-1xx-02-xx-dv-a lss-1xx-01-xx-dv-a 12.00 .472 12mm stack height lss-1xx-02-xx-dv-a lss-1xx-02-xx-dv-a 6.00 .236 lss-1xx-01-xx-dv-a lss-1xx-01-xx-dv-a 6mm stack height 10.00 .394 10mm stack height lss-1xx-02-xx-dv-a lss-1xx-03-xx-dv-a 7.00 .276 7mm stack height lss-1xx-03-xx-dv-a lss-1xx-01-xx-dv-a 8.00 .315 8mm stack height lss-1xx-03-xx-dv-a lss-1xx-03-xx-dv-a tube: pt-1-24-11-09 plug: tp-09 application views load parts with pin #1 in direction of arrow. sheet of .635mm terminal/socket combo by: lss-1xx-xx-xx-dv-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 07/01/2002 3 2 sheet scale: 4:1 revision y f:\dwg\misc\mktg\lss-1xx-xx-xx-dv-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
14.2000 ref .559 (no of pos x 0.635[.0250]) +1.500[.0600] 1.3966 ref .055 lc-08-tm-01 3.5 .14 "e" 0.50[.020] 0.36 .014 -k: polyimide film option (use k-500-300) fig. 2 e=((no of pos x 0.635 [.0250]) + 4.750 [.1870])/2) - 1.75 [.0689] "d" fig. 3 -lc: locking clip option (use lc-08-tm-01) -02 & -03 lead styles only (see note 6, sht. 1) sheet of .635mm terminal/socket combo by: lss-1xx-xx-xx-dv-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 07/01/2002 3 3 sheet scale: 4:1 revision y f:\dwg\misc\mktg\lss-1xx-xx-xx-dv-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
